top of page

Books

9781003403890.jpg

Articles

Experimental characterisation of hygrothermal properties of a 3D printed cementitious mortar. 

Pessoa, S.; Jesus, M.; Guimarães, A.S.; Lucas, S.S.; Simões, N.

Case Studies in Construction Materials, 19, e02355, 2023.

https://doi.org/10.1016/j.cscm.2023.e02355

The potential of 3D printing in building pathology: rehabilitation of cultural heritage.

Jesus, M.; Guimarães, A.S.; Rangel, B.; Alves, J.L.

International Journal of Building Pathology and Adaptation, 2023.

https://doi.org/10.1108/IJBPA-03-2022-0053

How 3DPC Will Transform Architectural Design.

Teixeira, J; Zuazua-Ros, A.; Jesus, M.; Rangel, B.; Guimarães, A.S.

In: Rangel, B., Guimarães, A.S., Lino, J., Santana, L. (eds) 3D Printing for Construction with Alternative Materials. Digital Innovations in Architecture, Engineering and Construction. Springer, Cham, 2023.

https://doi.org/10.1007/978-3-031-09319-7_1

Potential Use of Sugarcane Bagasse Ash in Cementitious Mortars for 3D Printing.

Jesus, M.; Teixeira, J.; Alves, J.L.; Pessoa, S.; Guimarães, A.S.; Rangel, B.

In: da Silva, L.F.M. (eds) Materials Design and Applications IV. Advanced Structured Materials, vol 168. Springer, Cham, 2023.

https://doi.org/10.1007/978-3-031-18130-6_7

Use of Waste Materials to Reduce Cement and Natural Aggregates in 3D Printing Mortars.

Jesus, M.; Costa, J.; Teixeira, J.; Pessoa, S.; Guimarães, A.S.; Rangel, B.; Moreira, L.; et al.

In: Rangel, B., Guimarães, A.S., Lino, J., Santana, L. (eds) 3D Printing for Construction with Alternative Materials. Digital Innovations in Architecture, Engineering and Construction. Springer, Cham, 2023.

https://doi.org/10.1007/978-3-031-09319-7_6

3D Printing for Construction: A Systematic Review of Its Sustainability.

Simioni, F.; Rangel, B.; Campos, N.; Teixeira, J.

In: Gaspar, F., Mateus, A. (eds) Sustainable and Digital Building. Springer, Cham, 2023.

https://doi.org/10.1007/978-3-031-25795-7_8

4D Printing and Construction: Reality, Future, or Science Fiction?

Alves, J.L.; Santana, L.; Rangel, B.

In: Rangel, B.; Guimarães, A.S.; Alves, J.L.; Santana, L. (eds) 3D Printing for Construction with Alternative Materials. Digital Innovations in Architecture, Engineering and Construction. Springer, Cham, 2023.

https://doi.org/10.1007/978-3-031-09319-7_7

A road map to find in 3D printing a new design plasticity for construction – The state of art.

Teixeira, J; Schaefer, C.O.; Rangel, B.; Maia, L.; Alves, J.L.

Frontiers of Architectural Research, 2022.

https://doi.org/10.1016/j.foar.2022.10.001

Influence of Supplementary Cementitious Materials on Fresh Properties of 3D Printable Materials.

Teixeira, J; Schaefer, C.O.; Maia, L.; Rangel, B.; Neto, R.; Alves, J.L.

Sustainability, 14 7: 3970-3970, 2022.

https://doi.org/10.3390/su14073970

4D Structures for Short-Time Building of Emergency Shelters.

Costa, A.; Rangel, B.; Alves, J.L.; Marques, A.; Silva, A.; Esfandiari, P.; Silva, J.; Silva, A.; Parente, M.

Journal of Materials: Design and Applications, 2022.

https://doi.org/10.1177/14644207221086496

BIM and Semantic Enrichment Methods and Applications: A Review of Recent Developments.

Dinis, F.M.; Martins, J.P.; Guimarães, A.S.; Rangel, B.

Archives of Computational Methods in Engineering, 2022.

https://doi.org/10.1007/s11831-021-09595-6

Workability control in the development of 3D printing cementitious mortars - laboratory methodology.

Teixeira, J.; Schaefer, C.O.; Maia, L.; Rangel, B.; Neto, R.; Alves, J.L.

Published at DCE Conference, 2021.

https://hdl.handle.net/10216/139874

Development of 3D printing sustainable mortars based on a bibliometric analysis.

Teixeira, J. ; Schaefer, C.O.; Rangel, B.; Alves, J.L.; Maia, L.; Nunes, S.; Neto, R.; Lopes, M.L.

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Application, 2021.

https://doi.org/10.1177/1464420721995210

3D printing in the construction industry - A systematic review of the thermal performance in buildings.

Pessoa, S.; Guimarães, A.S.; Lucas, S.S.; Simões, N.

Renewable and Sustainable Energy Reviews, 141, 110794, 2021.

https://doi.org/10.1016/j.rser.2021.110794

The 3D printing challenge in buildings.

Pessoa, S.; Guimarães, A.S.

E3S Web of Conferences, 172, 19005, 2020.

https://doi.org/10.1051/e3sconf/202017219005

Study of the Viability of 3D Printing Reinforced Cementitious Materials

Nunes, S.; Alves, J. L., Rangel, B., Neto, R., Teixeira, J.

Materiais 2019, Lisbon.

bottom of page